Table of Contents
Replacing the AWD differential fluid in your Honda Crosstour is an important maintenance task that can improve the vehicle’s performance and longevity. This DIY guide will walk you through the steps to safely and effectively change the differential fluid on your own.
Tools and Materials Needed
- Socket set and ratchet
- Drain pan
- Funnel
- New differential fluid (check owner’s manual for type and quantity)
- Wrench or screwdriver (for drain plug)
- Gloves and safety glasses
Preparation
Park your Honda Crosstour on a level surface and engage the parking brake. Ensure the engine is cool before starting. Gather all tools and materials needed for the job.
Draining the Old Differential Fluid
Locate the differential drain plug underneath the vehicle. Place the drain pan beneath it. Using the appropriate wrench, carefully remove the drain plug. Allow the old fluid to fully drain into the pan. Once drained, replace and tighten the drain plug securely.
Refilling with New Differential Fluid
Remove the fill plug on the differential housing. Using a funnel, pour the new differential fluid into the fill hole until it begins to flow out slightly. Replace and tighten the fill plug.
Final Checks and Tips
Start the engine and let it run for a few minutes. Shift through all gears to circulate the new fluid. Turn off the engine and recheck the fluid level, topping off if necessary. Dispose of the old fluid responsibly at a recycling center.
Conclusion
Changing the AWD differential fluid in your Honda Crosstour is a straightforward maintenance task that can save you money and extend your vehicle’s life. Follow these steps carefully, and always consult your owner’s manual for specific details and fluid specifications.